P0-P9 EXPLAINED | Most Electric Scooters Use This, EMOVE Cruiser and Many Escooter Models

Do you..?

- Always see P0-P9 on your user's manual and wonder what does it stands for? 

- Afraid of pressing the wrong button and screw up your machine? 

- P0-P3 (fixed) and wouldn't dare to press anything?

CONTINUE READING IF YOU WANT THE ANSWERS!

To gain access to the P settings, please press and hold the Power and Mode buttons at the same time. Until you see the P settings appear.

P0 (fixed) - This is only used when wheel diameter needs to be changed

Default: 5 or 10

P1 (fixed) - This will usually be fixed by default, there shouldn't be a need to change this. Shows the voltage of the battery (Under-voltage point of the battery will be displayed) E.g. Under voltage point will be 31.5V if you're seeing 315 on the display. 

315 - 36V Scooters

415 - 48V Scooters

430 - 52V

Press MODE to increase by 0.5V, Press POWER to decrease by 0.5V

Default: 430

P2 (fixed) - Shows the minimum voltage

Press MODE to increase, Press POWER to decrease

Default: 15 , will affect the accuracy of the speedometer

Important to note: If you are using EMOVE Cruiser, the maximum voltage is 52V - if your P2 settings is set lower than default, it might show that your battery only has 3 bars when in fact it is actually full. To the LCD display computer, it will be seen as full.

P3 (fixed) - Shows the speedometer speed setting. This will affect the accuracy of the speedometer

Default: 0

P4 - Types of Speed Display: In terms of Km/h (0) | miles/h (1)

P5 - Types of Start mode, some users prefer to have the kick start function as it feels safer. 

Throttle Accelerator Start (0) | Kick-Start (1)

P6 - Cruising Mode Setting. If this setting is turned on, once the throttle is kept at the same acceleration for 7 seconds, the cruising (auto riding) mode will starts

Turn on (1) | Turn off (0)

P7 - Pick Up Speed. Adrenaline junkies prefer a strong pick up speed, some choose the safer option.

Strong Pick Up (0) | Soft Pick Up (1)

P8 - Max Speed Setting 1~100% (Speed Adjustment Guide in previous post

P9 - Electric Brake Strength. This is used on your accelerator throttle, can be activated if you press all the way down while scooting.

Off (0) | Medium (1) | Hard (2)